Category Stock Firmware

But most of the problems and benefits that cause flashing stock ROM are below. The handset is powered by Samsung’s Exynos 9606 octa-core chipset and employs a 48MP primary rear camera. The 3500mAh battery doesn’t sound very stock Android firmware inspiring, but on a positive note – Moto bundles an 18W Turbocharger in the box. The handset has an in-display fingerprint sensor, triple rear cameras, a water-drop notch, and a 4030mAh battery with fast charging support. On the downside, the display isn’t sharp enough and that really bogs the experience down.

Earlier I removed this section assuming this is a very old version. But I have added this section back because the Gcam 8.1 APK is one of the most stable version that runs on many Android phones and gives better results than these new versions. GCam APK is generally safe to use, but since it is a third-party app that is not officially supported by Google, there is always a small risk involved when using it. It is recommended to only download GCam APK from trusted sources to reduce the risk of downloading a malicious version of the app.

• You can find How-to flash instruction on this page below.
• On this page, you can find the link to download the Sony Xperia L1 G3311 Stock ROM Firmware (Flash File).
• A custom ROM replaces your device’s original Android operating system with a new version of the Android operating system.
• Be sure to bookmark this page as we will update it as information changes over time.

The official Stock Firmware / Flash File of Tecno Camon 11 is now available for download. You just need to ask for the permission to download the file. We are sharing a step by step guide to install Tecno Camon 11 Official Firmware. Don’t try to skip any step because every step has it’s own importance in this guide if you don’t follow the guide correctly you may end up bricking your device. We have collected more information about Tecno Camon 11 Stock ROM down if you want you can read it from down. Custom ROMs are alternative variants of Android for different devices running on the Android operating system.

You could directly get the boot and vendor_boot.img files from here without downloading the firmware. But first, make sure that it matches the firmware version that is currently installed on your device. If it doesn’t match, then refer to the below manual steps to get this job done.

It has a separate settings panel called Blissify from where you can change almost everything. Right from themes to animation and lock screen interface. I would say if you want to try something different, do give it a shot. The added functionalities of Havoc-OS include tons of mods for the Status bar, buttons, lights, gestures, and other various configurations.